Developing the Low-Temperature Oxidation Mechanism of Cyclopentane: An Experimental and Theoretical Study

At present, the reactivity of cyclic alkanes is estimated by comparison with acyclic hydrocarbons. Due to the difference in the structure of cycloalkanes and acycloalkanes, the thermodynamic data obtained by analogy are not applicable. In this study, a molecular beam sampling vacuum ultraviolet photoionization time-of-flight mass spectrometer (MB-VUV-PI-TOFMS) was applied to study the low-temperature oxidation of cyclopentane (CPT) at a total pressure range from 1–3 atm and low-temperature range between 500 and 800 K. Low-temperature reaction products including cyclic olefins, cyclic ethers, and highly oxygenated intermediates (e. g., ketohydroperoxide KHP, keto-dihydroperoxide KDHP, olefinic hydroperoxides OHP and ketone structure products) were observed. Further investigation of the oxidation of CPT – electronic structure calculations – were carried out at the UCCSD(T)-F12a/aug-cc-pVDZ//B3LYP/6-31+ G(d,p) level to explore the reactivity of O₂ molecules adding sequentially to cyclopentyl radicals. Experimental and theoretical observations showed that the dominant product channel in the reaction of CPT radicals with O₂ is HO₂ elimination yielding cyclopentene. The pathways of second and third O₂ addition – the dissociation of hydroperoxide – were further confirmed. The results of this study will develop the low-temperature oxidation mechanism of CPT, which can be used for future research on accurately simulating the combustion process of CPT.     

Phosphoric-Acid Retention in High-Temperature Proton-Exchange Membranes

Great efforts have been conducted to develop high temperature proton exchange membrane fuel cell (HT-PEMFC) due to its features of enhanced electrocatalyst reactivity, simplified hydrothermal management system and high CO tolerance of catalysts, and remarkable progress has been achieved. However, the easy leaching of phosphoric acid (PA) from the membranes during operation limits its commercial scale-up in complicated environments. This concept here mainly focuses on the recent developments for mitigation of PA loss in PEMs. The probable mechanisms of PA loss are proposed. The approaches to improve PA retention for example via introduction of phosphonic acid by covalent bond, using ion-pairs interaction and siphoning effect, and blending with inorganic nanoparticles are described in detail. Among these strategies, the siphoning effect from the intrinsic microporous PEMs is the most efficient and enables the cell to operate flexibly within a broad temperature range. Therefore, this concept may provide new ideas for the scientists to retain PA, to improve the cell performance and expand the potential applications of PA doped PEMs at elevated humidity and wide temperature range.     

Improving Photocatalytic Performance through the Construction of a Supramolecular Organic Framework

A supramolecular organic framework-type photocatalyst, named TM-SOF, is constructed by the self-assembly of cucurbit[8]uril and a tetra-arm monomer containing four N, N’-dimethyl 2,5-bis(4-pyridinium)thiazolo[5,4-d]thiazole (MPT) moieties. Benefiting from the multivalent assembly, a photocatalytically active supramolecular MPT dimer can be stably formed in TM-SOF. In addition, TM-SOF exhibits better stability against temperature, substrate, and light irradiation. As a result, TM-SOF shows a significantly improved performance for the photocatalytic aerobic oxidation of aryl boronic acids and thioethers. It is anticipated that this line of research will provide a facile approach for fabricating high-performance supramolecular photocatalysis systems.     

One-step hydrolysis for the preparation of carboxylated cellulose nanofibrils with highly stable dispersibility from pomelo peel

Cellulose - One-step acid hydrolysis was successfully employed to prepare carboxylated cellulose nanofibrils (CCNFs) from pomelo peel waste with the mixture of hydrochloric acid and citric acid...     

Improved Reversible Zinc Storage Achieved in a Constitutionally Crystalline-Stable Mn(VO3)2 Nanobelts Cathode

Rechargeable zinc-ion batteries (ZIBs) are potential for grid-scale applications owing to their safety, low price, and available sources. The development of ZIBs cathode with high specific capacity, wide operating voltage window and stable cyclability is urgently needed in next-generation commercial batteries. Herein, we report a structurally crystalline-stable Mn(VO₃)₂ nanobelts cathode for ZIBs prepared via a facile hydrothermal method. The as-synthesized Mn(VO₃)₂ exhibited high specific capacity of 350 mAh g⁻¹ at 0.1 A g⁻¹, and maintained a capacity retention of 92 % after 10,000 cycles at 2 A g⁻¹. It also showed good rate performance and obtained a reversible capacity of up to 200 mAh g⁻¹ after 600 cycles at 0.2 A g⁻¹ under −20 °C. The electrochemical tests suggest that Mn(VO₃)₂ nanobelts impart fast Zn²⁺ ions migration, and the introduction of manganese atoms help make the structures more indestructible, leading to a good rate performance and prolonged cycle lifespan.     

Benzyl alcohol oxidation and hydrogen generation over MoS2/ZnIn2S4 composite photocatalyst

Research on Chemical Intermediates - Owing to the simultaneous utilization of photogenerated electrons and holes, coupling light-driven hydrogen (H2) evolution reaction (HER) and biomass-derived...     

Nonlocal Galerkin Strip Transfer Function Method for Vibration of Double-Layered Graphene Mass Sensor

Double-layered graphene sheets(DLGSs) can be applied to the development of a new generation of nanomechanical sensors due to their unique physical properties. A rectangular DLGS with a nanoparticle randomly located in the upper sheet is modeled as two nonlocal Kirchhoff plates connected by van der Waals forces. The Galerkin strip transfer function method which is a semi-analytical method is developed to compute the natural frequencies of the massplate vibrating system. It can give exact closed-form solutions along the longitudinal direction of the strip. The results obtained from the semi-analytical method are compared with the previous ones, and the differences between the single-layered graphene sheet(SLGS) and the DLGS mass sensors are also investigated. The results demonstrate the similarity of the in-phase mode between the SLGS and DLGS mass sensors. The sensitivity of the DLGS mass sensor can be increased by decreasing the nonlocal parameter, moving the attached nanoparticle closer to the DLGS center and making the DLGS smaller. These conclusions are helpful for the design and application of graphene-sheet-based resonators as nano-mass sensors.     

OCS分子在128 nm附近的光解动力学研究：S(3PJ=2,1,0)、S(1D2)以及S(1S0)产物通道

本文利用时间切片离子成像技术对OCS分子进行了真空紫外波段的光解动力学研究. 在四个光解光波长(从129.32到126.08 nm)下测量了硫原子解离产物S(³P_J=2,1,0)、S(¹D₂)、S(¹S₀)的速度影像，并从中清晰地发现了四个主要的解离产物通道：S(³P_J=2,1,0)+CO(X¹Σ⁺)，S(³P_J=2,1,0)+CO(A³π)，S(¹D₂)+CO(X¹Σ⁺)和S(¹S₀)+CO(X¹Σ⁺). 在实验影像中，产物CO分子的部分振动态结构能够得到分辨. 实验还获取解离产物总平动能谱，产物分支比和角分布. 对实验结果进行分析显示除绝热解离通道S(³P_J=2,1,0)+CO(A³π)之外，在其他三个产物通道中非绝热效应都起到非常重要的作用.     

基于简单MOPA结构实现3.08 kW全光纤窄线宽线偏振激光输出

基于简单的主振荡功率放大结构,演示了一种高功率窄线宽线性偏振全光纤激光器,其最大输出功率为3.08 kW,3 dB线宽为0.2 nm。在整个功率缩放过程中,偏振消光比约为94%,光束质量M 2约为1.4。这是国内外首次实现3 kW全保偏光纤激光输出,与基于相位调制的窄线宽激光器相比,该激光器可实现近似的线宽,同时具有受激布里渊散射阈值高、系统结构简单、成本低等特点。     

Applications of Markov spectra for the weighted partition network by the substitution rule

The weighted self-similar network is introduced in an iterative way. In order to understand the topological properties of the self-similar network, we have done a lot of research in this field.Firstly, according to the symmetry feature of the self-similar network, we deduce the recursive relationship of its eigenvalues at two successive generations of the transition-weighted matrix.Then, we obtain eigenvalues of the Laplacian matrix from these two successive generations.Finally, we calculate an accurate expression for the eigentime identity and Kirchhoff index from the spectrum of the Laplacian matrix.